Create MCR Packet Filter List

curl -X POST https://api.megaport.com/v2/product/mcr2/productUid/packetFilter \
     -H "Content-Type: application/json" \
     -d '{
  "description": "an example packet filter",
  "entries": [
    {
      "action": "permit",
      "description": "permit things",
      "destinationAddress": "10.1.1.1",
      "destinationPorts": "80",
      "ipProtocol": 6,
      "sourceAddress": "10.1.1.2"
    },
    {
      "action": "deny",
      "description": "deny things",
      "destinationAddress": "10.1.1.1",
      "ipProtocol": 6,
      "sourceAddress": "10.1.1.2",
      "sourcePorts": "1-999"
    }
  ]
}'

{
  "data": {
    "addressFamily": "IPv4",
    "description": "New Prefix Filter List",
    "entries": [
      {
        "action": "permit",
        "prefix": "10.0.0.0/24"
      },
      {
        "action": "deny",
        "prefix": "10.1.0.0/24"
      },
      {
        "action": "permit",
        "ge": "20",
        "le": "32",
        "prefix": "10.2.0.0/16"
      }
    ],
    "id": 2798
  },
  "message": "Created a new prefix list for MCR",
  "terms": "This data is subject to the Acceptable Use Policy https://www.megaport.com/legal/acceptable-use-policy"
}

Creates packet filter lists for the MCR specified by the productUid.

The MCR packet filter list is a named list of IP network addresses. Create a packet filter list to match and filter routes based on the routeâ€™s source address and ports, the destination address and ports, and the IP protocol.

When no packet filter is configured, all traffic is permitted.
When a packet filter is configured, any traffic not permitted by the filter is denied.
Up to 20 packet filter lists can be configured on each MCR.
Each list can contain up to 50 entries.
A filter can be applied multiple times on the same MCR.

The parameters have these values:

Source IP Address (required)
- Supports both IPv4 and IPv6 packets.
Destination IP Address (required)
- Supports both IPv4 and IPv6 packet.
IP Protocol
- A decimal integer between 0 and 255 taken from the Industry standard list of protocols.
Source Port/Port Range (for TCP and UDP protocols)
- Range to be expressed as nn-nn. For example, 25-32.
Destination Port/Port Range (for TCP and UDP protocols)
- Range to be expressed as nn-nn. For example, 25-32.
Description for each entry

For more information about packet filter lists, see Using Packet Filters.

Path parameters

productUidstringRequired

Request

This endpoint expects an object.

descriptionstringOptional

entrieslist of objectsOptional

Response

Create MCR Packet Filter List / Create MCR Packet Filter List

dataobjectOptional

messagestringOptional

termsstringOptional